Arrakis

On 2/14/2023 at 10:56 PM, Lorys89 said:

try this ssdt without kext igb or bootarg (e1000=0) and send ioreg log

SSDT-I210.aml.zip 853 B · 2 downloads

Hello,

Sorry to answer later in relation to your request but I had a lot of productions so I forbid myself to do tests during this period.

Here is the requested Ioreg.IOREG Arrakis.zip

The injection of the aml file makes the system unstable and kernel panics in series as soon as the activation of the ethernet port I210 seeks the connection….

@gosi

As usual, you have to replace some values with yours: MmioWhitelist, DeviceProperties, number of cores in the first 2 patches, boot-args, PlatformInfo, Memory and add resources.

EFI under OpenCore 0.8.8Trx 40 Gigabyte Designare OpenCore 0.8.8.zip

46 minutes ago, gosi said:

@Arrakis which OS X version are you running?

I was thinking about upgrading to a R6900XT which is probably not supported out of the box?

@gosi The reason I choose this blower model is that it fits on the graphics card slot.

Because I need my 4 PCI slots. Then the air is expelled by the card outside the case. (pc case Dark Base 900 from Be Quiet)

This allows me to have two graphics cards in my case without overheating problems.

If I take a 6900XT type card, I gain a little more performance but I lose a PCI slot.

You can go to an R6900XT without problems.

44 minutes ago, fabiosun said:

in this condition it should work adding pikera bootarg (we have same behaviour with 6900 xt

Thanks Fabiosun, I don't know. I will test later.

On 1/19/2023 at 7:29 AM, fabiosun said:

 

adieu 🙂

GoodBye 🙂

Ciao 🙂

(joking a bit)

Personally,

My Trx40 platform will be my first and last Hackintosh,

I am very happy with my setup. It's super stable. But it's not a Mac.

In view of the ultraStudio pro Max and its performance with the Neat Video plug-in (real time on a 25 P HD timeline, by the way also my config in Resolve)

I'm waiting for the release of the M3 generation to switch again to a Mac (It's not my fault, I've been fed since my childhood on the Mac 🤣😂). 

Hello,

I bought an AMD Radeon Pro W6800.

AMD

It is natively recognized by OSX.

My first idea was to part with my two Amd Radeon Pro WX9100.

But I noticed that the card heats up very quickly at 100° with peaks at 105° when the gpu is used at 100% with Resolve for example.

I understand better why there has never been a blower model on the 6000 series when Gigabyte had planned a RX6900XT blower version when this series of this type of GPU was announced.

And I also realize that Apple is only adding the X on these versions. The temperatures are also identical on their models.

YouTube Morgonaut

So I chose to install it on slot 3.

Installation note:

If the card is installed as the main GPU on slot 1 with the monitors connected to it. I have to deactivate the WhatereverGreen kext otherwise it's the black screen before the opening of the session.

If the card is installed on slot 3 with the screens connected to a WX9100 in slot 1. I can keep the WhatereverGreen kext. This is my current setup.

Which allows me to use it as a pure GPU for all the software from which you can choose your working GPU, for example like this:

@fabiosun 

I don't have as many options for Wake Up on this motherboard. It is disabled in my bios configuration.

I tried Wake up ON with ERP and without, it's the same result.

Hello,

I did a bios update and since then I have a small problem.

Old bios:

Sleep does not work. (I do not try to solve the problem I never use it)

Shutdown ok

Erp enable, shutdown ok. (this is the configuration I want since sleep does not work)

New bios:

Sleep does not work.

Erp enable, shutdown with reboot after 3 sec.

Erp disable extinction ok but as soon as I touch the keyboard or the mouse the leds of both light up and it annoys me seriously because it leads to nothing because this function is useful when sleep works .....

I checked the Mmio, it is correct.

As I have the Resizable BAR in the new bios.

I tried with and without it's the same.

I haven't changed anything in the hardware configuration.

I haven't changed anything in OpenCore except the Mmio on the first five values.

The configuration is identical in the bios.

So my problem, I'm trying to have Erp Enable functional not causing the reboot after shutdown.

Do you have an idea ?

Attached is my config.plist and the debug.

Arrakis.zip

4 hours ago, mbarbierato said:

@Arrakis Can try this version ? and thanks for your time

 

AppleIGB.kext.zip 96.03 kB · 1 download

Test done: still not operational. Stable system.

It is with peaceful that I do the tests. No problem.

below log and Ioereg and screenshot.

Arrakis Log et Ioreg.zip

@ Lorys 89

Does not work . the system becomes unstable. kernel panic on kernel panic. It reminds me exactly the same symptoms under BigSur 11.4

@mbarbierato 

it's identical and the status of the ports in the system preferences is inactive (red dot).

Prevents the hack from shutting down.

AppleIGB5.7.2.txt.zip

10 hours ago, Lorys89 said:

not use kext igb, not use ssdt i210 or patch dp.

add this kext and set min kernel 22.0.0

 

AppleIntelI210Ethernet.kext.zip 157.55 kB · 2 downloads

 

add bootarg :  e1000=0

 

reboot and send ioreg log

It's the same.

Intel 210 with Bootarg.zip

@ Lorys I  made a mistake in naming the log report, sorry.

@Lorys89 it's the same with to spoof I211 and ssdt.

with aml .zipto spoof without boot arg 0=1000.zipto spoof I211.zip

1 hour ago, Lorys89 said:

try to spoof i211, send pciroot lan 

In the 2 pciroot of the lan, in config in the DP section, you have to add

device-id

39150000

DATA

And reboots with kext igb active. 

 

Tell me if this is what you want me to inject into the DP section?.

I am a novice... Feel free to correct, thanks in advance.

Note: this is the correct PCI address

I211 Arrrakis.plist.zip

@Lorys89 with kext IGB active

TRX40 DESIGNARE REV 1.1 WITH IGB.zip

@Lorys89 No

Do you need with the kext igb ?

@mbarbierato and there you go

TRX40 GIGABYTE DESIGNARE REV1.1 ARRAKIS.zip

@Lorys89  it's the same with booting e1000=0

 Arrakis I210 AppleIGB Debug Ver 5.11.4 0=1000.txt.zip

@Lorys89

For both, it's the same.

Attached is the generated log.

Arrakis I210 AppleIGB Release Ver 5.11.4.zipArrakis I210 AppleIGB Debug Ver 5.11.4.txt.zip

1 hour ago, Lorys89 said:

@Arrakis would say the problem now is only on i210, can we bother you for the next tests and logs? 

 

 

For users : If you have the i211 works, if you have 2 i211 you have to connect lan cable only to one, and it works. 

@Lorys89Of course, I would be the first winner…

@fabiosun Test done, same.

@Lorys89 @fabiosun

1-I plugged in the cable, turn off, start.
- Result: same

I have never disabled Lan ports in the bios even when they weren't supported since Big Sur 11.4.

2 - I tried the experiment (with the ethernet cable still connected):
- Disable Lan ports in bios, startup, shutdown.
    Result: same (logic)
- Activation of Lan ports in the bios, startup.
    Result: same

@Lorys89 

Just a note, normally when there is no ethernet cable to connect. the Lan port should display: not connected (with the red circle)

Currently without cables connected on the two lan ports are in: self-assigned IP address. (with the orange circle)

@Lorys89 Just on one ethernet port.

@mbarbierato  @Lorys89 

There is a better on my configuration.

The kext is well recognized (see Capture) but as soon as I plug in the cable the connection is not established.

On the other hand, the kext no longer causes a restart when I turn off.

My hunch is that you are not very far from solving the problem.

Attached is the generated log.

Arrakis I210 Trx40.txt.zip