Jump to content

Arrakis

Donator
 View Profile  See their activity

  • Posts

    278

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Arrakis

  1. Arrakis
    @23d1 On my motherboard the Intel AX200 works perfectly with the following kexts on Ventura : Firmware Intel Bluetooth Ver 2.2.0 IntelBT Patcher Ver 2.2.0 BlueToolFixup Ver 2.2.4
  2. Arrakis
    @Lorys89 Nothing has changed except the numbering of the last two lines of the report.
  3. Arrakis
    @Lorys89By adding the kext, AppleIGB.kext and DebugEnhancer.kext This changes the behavior of my configuration, Intel I210 modules are not even detected by Ventura anymore. When I turn off it causes the hack to restart with the Kernel Panic logo... I tried the command but it fails. I entered the bootarg msgbuf=1048576 Here is the result in the terminal :
  4. Arrakis
    Bluetooth (Intel WIFI 6 AX200 internal module) is functional again on Ventura and at the same time on Monterey on my platform. In fact, I had missed an update of the following Kext: Intel Bluetooth Firmware Ver 2.2.0 IntelBT Patcher Ver 2.2.0 BlueToolFixup Ver 2.2.4 (all three work together).
  5. Arrakis
    @shrisha Exactly the same losses of Wifi and Bluetooth modules compared to Monterey. But I have no untimely restart when the wifi is activated even if it is inoperative.
  6. Arrakis
    @ Poddles @shrisha @Jaidy As I have a Gigabyte Designare you can compare my current OpenCore 0.8.5 efi Here for Monterey and Ventura. I just installed Ventura from a USB stick on a blank partition. Installation successful. @Fabiosun, you can put in OP this EFI, if you want.
  7. Arrakis
    @Poddles It is identical to Fabiosun and I think like him from my experience on my TXR40. On my system. I lost Ethernet (i210 Intel) stopped working since Monterey. (I didn't disable the ports in the bios) I remedied this problem with a USB C / ethernet 2.5 GB adapter. This is an experience for you. No kexts regarding Aquantia and motherboard ethernet. Connected your UBC C / Ethernet adapter like this from the start of the OSX to the ethernet connection natively. For me, works very well, it is recognized natively from the start so it is possible to install the new system from the backup partition. It is with this method that I test Ventura with each time a clean install. With Ventura, I will lose Bluetooth. At the time of today it no longer works but the wifi still works. It is with this method (USB C / ETHERNET adapter) that I test Ventura with each time a clean install on an NVME on its dynamic partition. (Add Volume in Disk Utility)
  8. Arrakis
    Installing Ventura Beta 6 (22A5331f) from Monterey 10.5.1. without problems with all my kexts activated. But the bluetooth still doesn't work.
  9. Arrakis
    Installed Resolve 18.0.1 without issue under Ventura beta 4.
  10. Arrakis
    Hello , I had a problem updating ventura beta 4 from ventura beta 3. After the 3rd boot, it crashed. Reboot to Rescue Partition Beta 13.0 I disabled all kexts except Lilu and Virtual SMC. Boot to rescue partition 13.0 Installation of 13.0 then update to beta 4 directly without problems. Then activate the kexts one by one. I manage to boot Ventura 13.0 Beta 4. Mystery As noted Here it's probably the kext BlueToolFixup (version 2.6.3) I made a mistake, I should have erased the Ventura partition before reinstalling 13.0 because the system startup hangs for about thirty 40 seconds before opening the session. I'll do a clean install later. I specify that I am under opencore 0.8.3 and the last versions kexts for Ventura.
  11. Arrakis
    @fabiosun I did a test with your efi for thunderbold connection. here I have two Pegasus R6 Promise thunderbold storages and a Blackmagic UltraStudio 4K Mini interface. No information in PCI ports like you. In the Thunderbolt tab when nothing is plugged in, the connectivity is 2 x 20 G/bs and not 1 x 40 G/bs as in your configuration. As soon as I hot or cold plug the Blackmagic UltraStudio 4K Mini interface, I have this but does not work When I hot or cold plug my Pegasus R6 Promise storages, I have this absolutely not recognized by the system and disappearance of information from the Blackmagic UltraStudio 4K Mini interface. For me it does not work natively without SSDT
  12. Arrakis
    @fabiosun On my configuration, the Thunderbolt is not recognized when the SSDT is disabled. Just the card appears in the PCI information with the USB controller. See Capture in the spoiler. I had flashed the Titan board with Mac firmware. Is it the same for you?
  13. Arrakis
    Beta 3 Resolve 18 works perfectly on Ventura. While it is not yet validated for Ventura. It bodes well.
  14. Arrakis
    Thanks to @fabiosunand @iGPU for the information that allowed me to successfully install Ventura. To update on my config: Disable AvoidDefrag quirk put old leaf7 patch maxKernel with 22.99.99 on all patches -lilubetaall boots arg I left DummyPowerManagement on True For me the most important is Ethernet and Thunderbolt. USB adapters work perfectly and so do Thunderbolt peripherals. Compared to Monterey, CPU info is bad (RestrictEvents needs to be updated as @fabiosun said) The I210 ethernet ports still inoperative (forever 😭). The IntelBluetoothFirmware kext needs to be updated too. When I connect to Wifi it is directly a wild reboot. Not tested on sleep, for me it has never worked. At @fabiosun, I noticed that in my kernel patches, I don't use the 2 patches below I enclose my bootable EFI OpenCore.0.8.2 for Monterey 12.4 and Ventura. (Warning, it is not neutral, you have to modify or remove property, MmioWhitelist, number of cores, some kexts , boot-args, CustomMemory, values in PlatformInfo. EFI OPEN 0.8.2 MONTERY 12.4 _ VENTURA TRX 40 GIGABYTE.zip
  15. Arrakis
    @fabiosun Exactly, I asked myself the question. Thanks a lot. On the other hand, I think I have problems with the Dummy Power Management. I was always obliged to activate it since the beginning of my hack. At first I will try without disabling it.
  16. Arrakis
    I tried to install Ventura without success 😭 with Opencore 0.8.2, VirtualSMC 1.3.0, Lilu 1.6.1, WhateverGreen 1.6.0.
  17. Arrakis
    @Jaidy Suspend does not work on my Gigabyte TRX40 Designare configuration. Sleep starts but 1 second later the system wakes up with black screens. I have to turn off the Hack at the on/off switch. I haven't really tried to solve the problem because I avoid leaving my computers on standby as much as possible. When I have to perform video exports that take time, I schedule the shutdown of the computer.
  18. Arrakis
    IGPU did a great job on the thunderbolt. I also use his work.👏😀 I have 3 devices (2 thunderbolt 2 raid storage and a Blackmagic Uktra 4k mini thunderbolt 3 interface and from the beginning I have never had a disconnect or hot plug issue not recognized. On my configuration, I wonder if it is not the TitanRidge card that prevents sleep. @fabiosunDo you still sleep operating on your machine?
  19. Arrakis
    Yes, I'll be sure to test...😃
  20. Arrakis
    @Kennyhack Hello, it must be connected to the Thunderbolt header and to the USB socket of the motherboard. She must be flashed. It will no longer be recognized on the Windows side. You need to install it in slot 4. You can follow the procedure Here
  21. Arrakis
    Hello, Move to Monterey 12.3.1 completed. Obligation to also use the AppleMCEReporterDisabler kext. On the other hand, I did not need to deactivate the Intel I210 modules in the Bios. Besides, they are still inoperative under 12.3.1. They're just disabled in system preferences so they don't have weird system behavior. PS: I hadn't noticed but the boots arguments have changed with version 1.0.7 of RestrictEvent. I use the revpatch=cpuname argument just to get the CPU name in System Information. Because I prefer to keep the real layout of the ram in the system information.
  22. Arrakis
    I just upgraded from Monterey 12.2.1 to Monterey 12.3.0 on my 2013 Mac Pro and the Metal performance of one of the two D700 cards is identical except for a few values. I will test later on my Hack with my Radeon Pro WX 9100 cards to determine if this is a problem that only affects 6000 series cards.
  23. Arrakis
    @fabiosunYes, this is the Monterey compatible version (15.9.314)
  24. Arrakis
    I just suffered 2 kernel panics in quick succession. Where does the panic come from? I haven't done any updates for OpenCore and Monterey. Current config OPenCore 0.7.7, Monterey 12.2 (21D49)
  25. Arrakis
    @fabiosunYes that's it. I expressed myself badly.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.