Support Team Lorys89 Posted May 21, 2023 Support Team Share Posted May 21, 2023 @Balamut Hi already done the mmio whitelist tests with @DSM2 In my opinion it does not depend on mmio, but in the last efi postata, activate the quirks and try oe 3 regions mmio Link to comment Share on other sites More sharing options...
Balamut Posted May 21, 2023 Share Posted May 21, 2023 Hi, instant kernel panic. ======== End of efiboot serial output. ======== mem_actual: 0x4000000000 legacy sane_size: 0x3ff0000000 PMAP: PCID enabled PMAP: Supervisor Mode Execute Protection enabled PMAP: Supervisor Mode Access Protection enabled panic(cpu 0 caller 0xffffff80075b3b93): Kernel trap at 0xffffff80075d1c4e, type 13=general protection, registers: CR0: 0x0000000080010013, CR2: 0x0000000000000000, CR3: 0x00000000237c2000, CR4: 0x00000000003200e0 RAX: 0x0000000000403041, RBX: 0xffffff80080f5630, RCX: 0x00000000000001aa, RDX: 0x0000000000000000 RSP: 0xffffff8007199f70, RBP: 0xffffff8007199fa0, RSI: 0x00000002353f7cf1, RDI: 0x0000000007735940 R8: 0x0000000000000045, R9: 0xfffffe91a36f5370, R10: 0x000000ff00000000, R11: 0x000000000000001e R12: 0x0000000000000000, R13: 0xffffff8007c47cef, R14: 0x0000000000000060, R15: 0xffffff8007c47cd5 RFL: 0x0000000000010046, RIP: 0xffffff80075d1c4e, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 0 NULL thread->t_tro pointer Backtrace (CPU 0), panicked thread: 0xffffff800831af28, Frame : Return Address 0xffffff8007199980 : 0xffffff800746f4fd mach_kernel : _handle_debugger_trap + 0x4ad 0xffffff80071999d0 : 0xffffff80075c3c54 mach_kernel : _kdp_i386_trap + 0x114 0xffffff8007199a10 : 0xffffff80075b36d9 mach_kernel : _kernel_trap + 0x3c9 0xffffff8007199a70 : 0xffffff800740f951 mach_kernel : _return_from_trap + 0xc1 0xffffff8007199a90 : 0xffffff800746f7dd mach_kernel : _DebuggerTrapWithState + 0x5d 0xffffff8007199b80 : 0xffffff800746ee87 mach_kernel : _panic_trap_to_debugger + 0x1a7 0xffffff8007199be0 : 0xffffff8007bdceab mach_kernel : _panic + 0x84 0xffffff8007199cd0 : 0xffffff80075b3b93 mach_kernel : _sync_iss_to_iks + 0x2c3 0xffffff8007199e50 : 0xffffff80075b3884 mach_kernel : _kernel_trap + 0x574 0xffffff8007199eb0 : 0xffffff800740f951 mach_kernel : _return_from_trap + 0xc1 0xffffff8007199ed0 : 0xffffff80075d1c4e mach_kernel : _xcpm_init + 0xde 0xffffff8007199fa0 : 0x10046 No mapping exists for frame pointer Backtrace terminated-invalid frame pointer 0x8 can't perform kext scan: no kext summaryNULL thread->t_tro pointer Process name corresponding to current thread (0xffffff800831af28): Unknown Boot args: -v serial=5 keepsyms=1 debug=0x100 root-dmg=file:///BaseSystem/BaseSystem.dmg Mac OS version: Not yet set Kernel version: Darwin Kernel Version 22.5.0: Mon Apr 24 20:51:50 PDT 2023; root:xnu-8796.121.2~5/RELEASE_X86_64 Kernel UUID: 7E997BC9-2104-3D4D-9AAE-17BD7A3FEC2D roots installed: 0 KernelCache slide: 0x0000000007000000 KernelCache base: 0xffffff8007200000 Kernel slide: 0x00000000070dc000 Kernel text base: 0xffffff80072dc000 __HIB text base: 0xffffff8007100000 System shutdown begun: NO Panic diags file unavailable, panic occurred prior to initialization Hibernation exit count: 0 System uptime in nanoseconds: 272390813 Warning: clock is not configured. Can't get time Nested panic detected - entry count: 2 panic_caller: 0xffffff80075b3b93 Nested panic string: Kernel trap at 0xffffff800747040b, type 0=divide error, registers: CR0: 0x0000000080010013, CR2: 0x0000000000000000, CR3: 0x00000000237c2000, CR4: 0x00000000003200e0 RAX: 0x0000000000000000, RBX: 0xffffff8007c4e531, RCX: 0x0000000000000000, RDX: 0x0000000000000000 RSP: 0xffffff80071995f0, RBP: 0xffffff8007199600, RSI: 0x0000000000000001, RDI: 0x0000000000000000 R8: 0x0000000000000010, R9: 0x0000000000000001, R10: 0x0000000000000001, R11: 0x0000000000000000 R12: 0x0000000000000000, R13: 0x0000000000000008, R14: 0x0000000000000000, R15: 0xffffff8007c452ba RFL: 0x0000000000010046, RIP: 0xffffff800747040b, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 3, VF: 0 <end nested panic string> panic(cpu 0 caller 0xffffff80075b3b93): Kernel trap at 0xffffff80075b3a48, type 1604517996= I've never seen that error in my life, what is it? Attaching the log. CoolTerm Capture 2023-05-21 15-42-35.txt.zip Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 21, 2023 Support Team Share Posted May 21, 2023 2 minuti fa, Balamut ha scritto: Hi, instant kernel panic. ======== End of efiboot serial output. ======== mem_actual: 0x4000000000 legacy sane_size: 0x3ff0000000 PMAP: PCID enabled PMAP: Supervisor Mode Execute Protection enabled PMAP: Supervisor Mode Access Protection enabled panic(cpu 0 caller 0xffffff80075b3b93): Kernel trap at 0xffffff80075d1c4e, type 13=general protection, registers: CR0: 0x0000000080010013, CR2: 0x0000000000000000, CR3: 0x00000000237c2000, CR4: 0x00000000003200e0 RAX: 0x0000000000403041, RBX: 0xffffff80080f5630, RCX: 0x00000000000001aa, RDX: 0x0000000000000000 RSP: 0xffffff8007199f70, RBP: 0xffffff8007199fa0, RSI: 0x00000002353f7cf1, RDI: 0x0000000007735940 R8: 0x0000000000000045, R9: 0xfffffe91a36f5370, R10: 0x000000ff00000000, R11: 0x000000000000001e R12: 0x0000000000000000, R13: 0xffffff8007c47cef, R14: 0x0000000000000060, R15: 0xffffff8007c47cd5 RFL: 0x0000000000010046, RIP: 0xffffff80075d1c4e, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 0 NULL thread->t_tro pointer Backtrace (CPU 0), panicked thread: 0xffffff800831af28, Frame : Return Address 0xffffff8007199980 : 0xffffff800746f4fd mach_kernel : _handle_debugger_trap + 0x4ad 0xffffff80071999d0 : 0xffffff80075c3c54 mach_kernel : _kdp_i386_trap + 0x114 0xffffff8007199a10 : 0xffffff80075b36d9 mach_kernel : _kernel_trap + 0x3c9 0xffffff8007199a70 : 0xffffff800740f951 mach_kernel : _return_from_trap + 0xc1 0xffffff8007199a90 : 0xffffff800746f7dd mach_kernel : _DebuggerTrapWithState + 0x5d 0xffffff8007199b80 : 0xffffff800746ee87 mach_kernel : _panic_trap_to_debugger + 0x1a7 0xffffff8007199be0 : 0xffffff8007bdceab mach_kernel : _panic + 0x84 0xffffff8007199cd0 : 0xffffff80075b3b93 mach_kernel : _sync_iss_to_iks + 0x2c3 0xffffff8007199e50 : 0xffffff80075b3884 mach_kernel : _kernel_trap + 0x574 0xffffff8007199eb0 : 0xffffff800740f951 mach_kernel : _return_from_trap + 0xc1 0xffffff8007199ed0 : 0xffffff80075d1c4e mach_kernel : _xcpm_init + 0xde 0xffffff8007199fa0 : 0x10046 No mapping exists for frame pointer Backtrace terminated-invalid frame pointer 0x8 can't perform kext scan: no kext summaryNULL thread->t_tro pointer Process name corresponding to current thread (0xffffff800831af28): Unknown Boot args: -v serial=5 keepsyms=1 debug=0x100 root-dmg=file:///BaseSystem/BaseSystem.dmg Mac OS version: Not yet set Kernel version: Darwin Kernel Version 22.5.0: Mon Apr 24 20:51:50 PDT 2023; root:xnu-8796.121.2~5/RELEASE_X86_64 Kernel UUID: 7E997BC9-2104-3D4D-9AAE-17BD7A3FEC2D roots installed: 0 KernelCache slide: 0x0000000007000000 KernelCache base: 0xffffff8007200000 Kernel slide: 0x00000000070dc000 Kernel text base: 0xffffff80072dc000 __HIB text base: 0xffffff8007100000 System shutdown begun: NO Panic diags file unavailable, panic occurred prior to initialization Hibernation exit count: 0 System uptime in nanoseconds: 272390813 Warning: clock is not configured. Can't get time Nested panic detected - entry count: 2 panic_caller: 0xffffff80075b3b93 Nested panic string: Kernel trap at 0xffffff800747040b, type 0=divide error, registers: CR0: 0x0000000080010013, CR2: 0x0000000000000000, CR3: 0x00000000237c2000, CR4: 0x00000000003200e0 RAX: 0x0000000000000000, RBX: 0xffffff8007c4e531, RCX: 0x0000000000000000, RDX: 0x0000000000000000 RSP: 0xffffff80071995f0, RBP: 0xffffff8007199600, RSI: 0x0000000000000001, RDI: 0x0000000000000000 R8: 0x0000000000000010, R9: 0x0000000000000001, R10: 0x0000000000000001, R11: 0x0000000000000000 R12: 0x0000000000000000, R13: 0x0000000000000008, R14: 0x0000000000000000, R15: 0xffffff8007c452ba RFL: 0x0000000000010046, RIP: 0xffffff800747040b, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 3, VF: 0 <end nested panic string> panic(cpu 0 caller 0xffffff80075b3b93): Kernel trap at 0xffffff80075b3a48, type 1604517996= I've never seen that error in my life, what is it? Attaching the log. CoolTerm Capture 2023-05-21 15-42-35.txt.zip 24 kB · 0 download Take ssdt of my last efi, and you use it in the best efi you've tried so far, but you only have to use my ssdt without other active, and you let me know. Use basic efi, minimal kext and no serial debugging Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 21, 2023 Support Team Share Posted May 21, 2023 Let me explain, w790 has a novelty, rtc is not inside lpc0, but is inside pc00. Link to comment Share on other sites More sharing options...
Balamut Posted May 21, 2023 Share Posted May 21, 2023 Just now, Lorys89 said: Let me explain, w790 has a novelty, rtc is not inside lpc0, but is inside pc00. Damn I've missed that. Let me set up a new EFI and test it with you SSDT. Why disable debug? any problems with it? Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 21, 2023 Support Team Share Posted May 21, 2023 If you want you can leave the debug, I said just to speed up 😝 1 Link to comment Share on other sites More sharing options...
Balamut Posted May 21, 2023 Share Posted May 21, 2023 A no go. Same "Still waiting for root device" Log. CoolTerm Capture 2023-05-21 16-05-08.txt.zip OC config.plist.zip Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 21, 2023 Support Team Share Posted May 21, 2023 Are the bios settings correct? Above 4g enabled Csm disabled Fastboot and secureboot disabled Resize gpu bar? How did you set it up? Link to comment Share on other sites More sharing options...
Balamut Posted May 21, 2023 Share Posted May 21, 2023 32 minutes ago, Lorys89 said: Above 4g enabled On 33 minutes ago, Lorys89 said: Csm disabled We don't have CSM, it's automatically disabled. 33 minutes ago, Lorys89 said: Fastboot on/off 33 minutes ago, Lorys89 said: secureboot on/off Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 11 ore fa, Balamut ha scritto: config.plist.zip 5 kB · 0 download booter /quirks is bad use this : config.plist.zip Link to comment Share on other sites More sharing options...
Balamut Posted May 22, 2023 Share Posted May 22, 2023 Same, this Still waiting for root device is killing me. ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x388D9 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x38FA3 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3966D (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x39D37 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3A401 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3AACB (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B195 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B85F (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3BF2A (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3C5F5 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3CCC0 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3D38B (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3DA56 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3E121 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3E7EC (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3EEB7 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3F584 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3FC51 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x4031E (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x409EB (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x410B8 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x41785 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x41E52 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x4251F (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x42BEC (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x432B9 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x43986 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x44053 (20160930/psloop-285) ACPI Error: [\_SB_.PC00.XHCI.RHUB.HS01] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-292) ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-310) ACPI Exception: AE_NOT_FOUND, (SSDT: A M I ) while loading table (20160930/tbxfload-319) ACPI Error: 1 table load failures, 5 successful (20160930/tbxfload-342) [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem CoolTerm Capture 2023-05-22 12-56-30.txt.zip Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 25 minuti fa, Balamut ha scritto: Same, this Still waiting for root device is killing me. ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x388D9 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x38FA3 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3966D (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x39D37 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3A401 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3AACB (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B195 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B85F (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3BF2A (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3C5F5 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3CCC0 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3D38B (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3DA56 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3E121 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3E7EC (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3EEB7 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3F584 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3FC51 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x4031E (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x409EB (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x410B8 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x41785 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x41E52 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x4251F (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x42BEC (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x432B9 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x43986 (20160930/psloop-285) ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x44053 (20160930/psloop-285) ACPI Error: [\_SB_.PC00.XHCI.RHUB.HS01] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-292) ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-310) ACPI Exception: AE_NOT_FOUND, (SSDT: A M I ) while loading table (20160930/tbxfload-319) ACPI Error: 1 table load failures, 5 successful (20160930/tbxfload-342) [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem [addMemoryRange()] AppleVTD is not yet installed as gSystem CoolTerm Capture 2023-05-22 12-56-30.txt.zip 30 kB · 1 download add this and reboot SSDT-Test.aml.zip Link to comment Share on other sites More sharing options...
Balamut Posted May 22, 2023 Share Posted May 22, 2023 Nothing changed. CoolTerm Capture 2023-05-22 13-35-54.txt.zip 1 Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 Have you created the new efi? With only the essentials? Link to comment Share on other sites More sharing options...
Balamut Posted May 22, 2023 Share Posted May 22, 2023 Just now, Lorys89 said: Have you created the new efi? With only the essentials? Yup, still getting that damn still waiting for root crap. Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 Can you try Catalina? To raise a doubt .. Use usbinjectall and the active xhcportlimit quirks Link to comment Share on other sites More sharing options...
Balamut Posted May 22, 2023 Share Posted May 22, 2023 Gonna try to install Monterey and down see what happens. Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 Use the recovery, do the tests quickly You can try other test with this kext https://github.com/acidanthera/CpuTscSync/releases/download/1.0.9/CpuTscSync-1.0.9-RELEASE.zip 1 Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 Do you have latest bios version? Link to comment Share on other sites More sharing options...
Balamut Posted May 22, 2023 Share Posted May 22, 2023 Yup latest one Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 22, 2023 Support Team Share Posted May 22, 2023 Let me know outcome with Catalina 1 Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted May 23, 2023 Support Team Share Posted May 23, 2023 @Balamut @DSM2 try with this SSDT-Test.aml.zip 2 Link to comment Share on other sites More sharing options...
Balamut Posted May 25, 2023 Share Posted May 25, 2023 No Dice. Downloading Catalina lets see how that goes. Link to comment Share on other sites More sharing options...
Balamut Posted June 6, 2023 Share Posted June 6, 2023 Same thing with Catalina and Sonoma, seems like the issue is in the ACPI. Catalina.txt.zip USB Sonoma.txt.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now