shutterbug168 Posted December 3, 2020 Share Posted December 3, 2020 @fabiosunFor your TR TB3 card, did you create a special TB aml boot loader for it? Since I am using a modified EFI from @Rocket88, I was hoping the MMIO whitelist was already good to go... What do I need to check for on the list? Thanks! @thenightflyer You are further along than me... But I think you are having a hot-plug problem with the TB3 card. To get hot-plug working, you will need a specific booltloader aml for your MB. Which board are you using? Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 3, 2020 Supervisor Share Posted December 3, 2020 3 minutes ago, shutterbug168 said: @fabiosunFor your TR TB3 card, did you create a special TB aml boot loader for it? Since I am using a modified EFI from @Rocket88, I was hoping the MMIO whitelist was already good to go... What do I need to check for on the list? Thanks! @thenightflyer You are further along than me... But I think you are having a hot-plug problem with the TB3 card. To get hot-plug working, you will need a specific booltloader aml for your MB. Which board are you using? mmmhhhhh 😛 😛 MMIO list is different for your board Also if user have the same your board you have to check in your debug log... ah sorry..you have an old signature I think..but that said above is still valid For thunderbolt you need a proper SSDT.aml file to add in ACPI folder and in your config.plist more skilled people to adopt one for you is @iGPU 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 5, 2020 Supervisor Share Posted December 5, 2020 @shutterbug168 mmmhhh here it seems fine to me It is your debug log? Post also exact EFI you are using without your serial because this log is good and you shouldn't have shutdown problem 1 Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 5, 2020 Author Share Posted December 5, 2020 1 hour ago, fabiosun said: @shutterbug168 mmmhhh here it seems fine to me It is your debug log? Post also exact EFI you are using without your serial because this log is good and you shouldn't have shutdown problem Very strange🤨 Yes, it’s from the EFI drive... Will post my EFI when I get back, but it’s based on @Driftwood’s EFI. Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 5, 2020 Supervisor Share Posted December 5, 2020 @shutterbug168if you want open a thread in general area with the name of your motherboard and CPU used, so we can focus there about your problem And we will win also in this 🙂 1 Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 5, 2020 Author Share Posted December 5, 2020 2 hours ago, fabiosun said: @shutterbug168if you want open a thread in general area with the name of your motherboard and CPU used, so we can focus there about your problem And we will win also in this 🙂 Sure! Here's my EFI with additional log files. The last two should capture the sleep problem -- I had to shut the power to reboot it while it's "not sleeping" and stuck at 99... It could be my BIOS settings since most Asrock users are not having these problems... Archive.zip Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 6, 2020 Supervisor Share Posted December 6, 2020 11 hours ago, shutterbug168 said: Sure! Here's my EFI with additional log files. The last two should capture the sleep problem -- I had to shut the power to reboot it while it's "not sleeping" and stuck at 99... It could be my BIOS settings since most Asrock users are not having these problems... Backup your EFI and use this if you want try post also this Energy saver screen grab too see yours (Sleep related) Thank you EFI.zip 1 Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 6, 2020 Author Share Posted December 6, 2020 7 hours ago, fabiosun said: Backup your EFI and use this if you want try post also this Energy saver screen grab too see yours (Sleep related) Thank you EFI.zip 2.48 MB · 1 download Thanks, @fabiosun! Your modified EFI boots up fine... When I check the option of "Prevent computer from sleep...," it won't sleep but will turn the screen off after the 15 mins (as I set it). But the shutdown problem persists: it will restart immediately and get stuck at 99...🤨 I know you don't have an Asrock mobo, but here's my UEFI settings... I think I have all the major parameters set correctly: CSM disabled, Above 4G enabled, PCIe Power disabled (similar to wake on lan)... Did I miss other important BIOS settings? Thanks again! Current BIOS.BIN.zip Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 6, 2020 Supervisor Share Posted December 6, 2020 @shutterbug168 please try to force sleep from menu then post always latest opencore debug log file to see in it if MMIO are skipped in a good way as we set in config if you can reset also your nvram from opencor menu press spacebar if you do not see nvram reset icon which gpu do you have? 1 Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 6, 2020 Author Share Posted December 6, 2020 1 hour ago, fabiosun said: @shutterbug168 please try to force sleep from menu then post always latest opencore debug log file to see in it if MMIO are skipped in a good way as we set in config if you can reset also your nvram from opencor menu press spacebar if you do not see nvram reset icon which gpu do you have? Booting up with your EFI, the machine will not go to sleep even when I force it with the Apple menu option -- it doesn't matter if I check the "Prevent computer from sleeping..." or not. Here are the log files... Thanks! Archive.zip Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 6, 2020 Author Share Posted December 6, 2020 1 hour ago, fabiosun said: @shutterbug168 please try to force sleep from menu then post always latest opencore debug log file to see in it if MMIO are skipped in a good way as we set in config if you can reset also your nvram from opencor menu press spacebar if you do not see nvram reset icon which gpu do you have? The machine behaves the same after the nvram reset... Link to comment Share on other sites More sharing options...
shutterbug168 Posted December 6, 2020 Author Share Posted December 6, 2020 Getting stuck at 99 is because of the m.2 wifi/bt replacement card! After I turn it off (as Intel wifi/bt) in the bios, the machine doesn't get stuck anymore. The only problem is that the wifi is not working but BT does... So, when I try to shutdown, it will simply restart all the way instead of getting stuck. Again, other Asrock users who have replaced the intel wifi card are not reporting such a problem🤨 1 Link to comment Share on other sites More sharing options...
SQA Posted January 11, 2021 Share Posted January 11, 2021 Hey guys I have the Asrock TRX40 Creator with 3970X desiring to run Mac OS CAT or Big Sur, I need some help to get it done, I'm a newbie to this, but I'm up to see the final product in operation. Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted January 11, 2021 Supervisor Share Posted January 11, 2021 hello @SQA welcome here put in your signature your hardware, and if you want open a your thread with your motherboard on title as some others users did 🙂 thank you you can also go on here if your hardware is pretty similar 1 Link to comment Share on other sites More sharing options...
SQA Posted January 11, 2021 Share Posted January 11, 2021 (edited) New here and not sure about opening a thread , I'm will to get it started to get the help Edited January 11, 2021 by SQA 1 Link to comment Share on other sites More sharing options...
SQA Posted January 11, 2021 Share Posted January 11, 2021 Please help me set up a thread Link to comment Share on other sites More sharing options...
SQA Posted January 11, 2021 Share Posted January 11, 2021 So I started a new topic REF: asrock trx40 3970x samsung 970 pro 1tb radeon vii 64 gb memory, can you help Fabiosun, thanks in advance. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now