Arrakis Posted December 3, 2020 Share Posted December 3, 2020 (edited) Hello, I simplified the kernel patch as much as possible on the advice of @fabiosun but I find myself with the obligation to keep the argument : cpu_topology_sort -disable _x86_validate_topology Is it related to the AMD 3960 X processor or the motherboard ? EFI Open Core 0.6.4 / Big Sur 11.0.1 Edit Open Core 0.7.2 / Big Sur 11.5.2 (the best to date that I have ever had since I started hackintosh.) EFI OPEN CORE 0.7.2 TRx40 DESIGNARE REV1.1.zip Edited August 22, 2021 by Arrakis 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 3, 2020 Supervisor Share Posted December 3, 2020 thank you @Arrakisfor this thread and your tests Maybe some other users with a Gigabyte board could test.. in our testing I see also you have to use dummypowermangement quirk and rebuildapplememory quirk if I remember well.. I am curious also about this 🙂 1 Link to comment Share on other sites More sharing options...
Arrakis Posted December 3, 2020 Author Share Posted December 3, 2020 I confirm, DummyPowerManagement and RebuildAppleMemoryMap must be activated,😀 1 Link to comment Share on other sites More sharing options...
thenightflyer Posted December 5, 2020 Share Posted December 5, 2020 (edited) I'm waiting my new designare with 3970X cpu....i will start with your efi to see if with a different cpu BS will start too. Did you put in 1 slot the videocard, and thunderbolt? In 4th slot? Can you insert pictures of bios settings? Edited December 5, 2020 by thenightflyer Link to comment Share on other sites More sharing options...
Arrakis Posted December 6, 2020 Author Share Posted December 6, 2020 Hello,😀 I strongly advise you to flash the bios before mounting the PC. I am in Agesa version 1.0.0.4 The GPU is in slot1. The thunderbolt card is in slot 4. 1 Link to comment Share on other sites More sharing options...
thenightflyer Posted December 12, 2020 Share Posted December 12, 2020 @ArrakisOk i set up my system and i tried your EFI but maybe you did some mistake in packaging it because i've no image found so i tried to use 0.64 release with your config and kext and now i'm able to boot. Please can you upload again your updated EFI? Link to comment Share on other sites More sharing options...
Arrakis Posted December 16, 2020 Author Share Posted December 16, 2020 On 12/12/2020 at 1:15 AM, thenightflyer said: @ArrakisOk i set up my system and i tried your EFI but maybe you did some mistake in packaging it because i've no image found so i tried to use 0.64 release with your config and kext and now i'm able to boot. Please can you upload again your updated EFI? Hello,😀 I just replaced the EFI in my first post. It is up to date with the official OpenCore 0.6.4 version I haven't changed anything. 1 Link to comment Share on other sites More sharing options...
Arrakis Posted December 23, 2020 Author Share Posted December 23, 2020 Hello, I reiterated with EFI my first updated post for OpenCore 0.6.4. Always the same problem. Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 23, 2020 Supervisor Share Posted December 23, 2020 @arrakis have you changed something in your pc? Bios/Hardware? 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 23, 2020 Supervisor Share Posted December 23, 2020 if you want try this config with your same problematic EFI config.plist.zip 1 Link to comment Share on other sites More sharing options...
Arrakis Posted December 23, 2020 Author Share Posted December 23, 2020 (edited) @fabiosun I tried your config.plist by removing the argument: cpu_topology_sort -disable _x86_validate_topology It’s the same kind of mistake. My EFI from the first post is working perfectly fine. I'm just looking to simplify the kernel patch. I have to keep the argument: cpu_topology_sort -disable _x86_validate_topology Otherwise I get the kind of error message like the previous post: In memory Panic..... 1 hour ago, fabiosun said: @arrakis have you changed something in your pc? Bios/Hardware? I haven't changed anything in my setup, by the way my EFI can complete your TRX40 library. Edited December 23, 2020 by Arrakis Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 23, 2020 Supervisor Share Posted December 23, 2020 ah kk it is not a new problem... 🙂 8 minutes ago, Arrakis said: @fabiosun I tried your config.plist by removing the argument: cpu_topology_sort -disable _x86_validate_topology It’s the same kind of mistake. My EFI from the first post is working perfectly fine. I'm just looking to simplify the kernel patch. I have to keep the argument: cpu_topology_sort -disable _x86_validate_topology Otherwise I get the kind of error message like the previous post: In memory Panic..... I haven't changed anything in my setup, by the way my EFI can complete your TRX40 library. if you can post also an IOREG I will put it with the EFI togheter mine and @Ploddles ones 🙂 1 Link to comment Share on other sites More sharing options...
Arrakis Posted December 23, 2020 Author Share Posted December 23, 2020 36 minutes ago, fabiosun said: if you can post also an IOREG I will put it with the EFI togheter mine and @Ploddles ones 🙂 😀 IORegistry TRX40 DESIGNARE REV 1.1.zip 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted December 23, 2020 Supervisor Share Posted December 23, 2020 done @Arrakis Grazie 1 Link to comment Share on other sites More sharing options...
Renato Posted April 4, 2021 Share Posted April 4, 2021 On 12/23/2020 at 4:27 PM, Arrakis said: 😀 IORegistry TRX40 DESIGNARE REV 1.1.zip 5.87 MB · 7 downloads Hi, I am really in luck, I was looking for exactly these info, albeit I have a designare V 1.0 and not the 1.1. Looking at you configuration, I can see it is miles away from the one I was able to come up with, by following the opencore guide, in terms of drivers, kext and ACPI. In relation to the latter, did you create those SSDT by yourself ? did you find a guide? If so, could you provide me with the link of such guide? Thanks. Link to comment Share on other sites More sharing options...
Arrakis Posted April 7, 2021 Author Share Posted April 7, 2021 @Renato I modified none of the SSDTs in my configuration. SSDT-TRX40-EC-USBX comes from the Dortonia site and the other two are from the configuration of Meina222 for the management of the TitanRidge card. Link to comment Share on other sites More sharing options...
Arrakis Posted May 3, 2021 Author Share Posted May 3, 2021 I tried again to remove the same argument in kernel / patch ((cpu_topology_sort -disable _x86_validate_topology) ) with the new patch for Big Sur 11.3 and the 0.6.8 open core version is still the same. I have to keep this argument enabled.😐 Link to comment Share on other sites More sharing options...
Arrakis Posted June 1, 2021 Author Share Posted June 1, 2021 (edited) 😀 For those who need my EFI. Edit : With OpenCore version 0.7.1 and higher. the problem is solved. The last EFI dated is in the first post. Edited August 3, 2021 by Arrakis 1 Link to comment Share on other sites More sharing options...
Arrakis Posted November 4, 2022 Author Share Posted November 4, 2022 @mbarbierato @Lorys89 There is a better on my configuration. The kext is well recognized (see Capture) but as soon as I plug in the cable the connection is not established. Spoiler On the other hand, the kext no longer causes a restart when I turn off. My hunch is that you are not very far from solving the problem. Attached is the generated log. Arrakis I210 Trx40.txt.zip 1 Link to comment Share on other sites More sharing options...
mbarbierato Posted November 4, 2022 Share Posted November 4, 2022 3 ore fa, Arrakis ha scritto: @mbarbierato @Lorys89 There is a better on my configuration. The kext is well recognized (see Capture) but as soon as I plug in the cable the connection is not established. Mostra contenuto nascosto On the other hand, the kext no longer causes a restart when I turn off. My hunch is that you are not very far from solving the problem. Attached is the generated log. Arrakis I210 Trx40.txt.zip 6 kB · 1 download Thanks for log as soon as I have a moment I check the log Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted November 4, 2022 Support Team Share Posted November 4, 2022 6 ore fa, Arrakis ha scritto: @mbarbierato @Lorys89 There is a better on my configuration. The kext is well recognized (see Capture) but as soon as I plug in the cable the connection is not established. Mostra contenuto nascosto On the other hand, the kext no longer causes a restart when I turn off. My hunch is that you are not very far from solving the problem. Attached is the generated log. Arrakis I210 Trx40.txt.zip 6 kB · 2 download Have you connected the lan cable to both 2 cards? If you do try to connect it as 1 only. Link to comment Share on other sites More sharing options...
Arrakis Posted November 4, 2022 Author Share Posted November 4, 2022 @Lorys89 Just on one ethernet port. Link to comment Share on other sites More sharing options...
Arrakis Posted November 4, 2022 Author Share Posted November 4, 2022 (edited) @Lorys89 Just a note, normally when there is no ethernet cable to connect. the Lan port should display: not connected (with the red circle) Currently without cables connected on the two lan ports are in: self-assigned IP address. (with the orange circle) Edited November 4, 2022 by Arrakis 1 Link to comment Share on other sites More sharing options...
Support Team Lorys89 Posted November 4, 2022 Support Team Share Posted November 4, 2022 Try with only one LAN cable connected And restart hack Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted November 4, 2022 Supervisor Share Posted November 4, 2022 @Arrakishave you tried to disable from bios a lan power off pc and power on with only the lan enabled connected? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now