ziocharly Posted July 12, 2019 Share Posted July 12, 2019 Buongiorno a tutti, apro questo nuovo topic nella speranza di poter utilizzare Mojave sul mio nuovo notebook. La situazione: - Installato SSD 512 Gb NVMe, visibile da windows 10, ma non inizializzato - Creata nuova usb key con il nuovo installer V.3.6 e con l'ultima immagine di Mojave 14.5.02 - Installato in UEFI Clover, l'ultima V.4972, in ESP - Copiati in 'kext/10.14' i seguenti driver: FakeSmc, Lilu, USBInjectAll, VirtualSMC, WhateverGreen, HibernationFixUp, AppleAlc - Disabilitati TUTTI i fixup come indicato nella guida - Introdotto -V per il verbose - Disabilitato HP secure boot (non validava il boot da USB) Risultato : - Arriva la main page di selezione delle unita e vedo USB Mojave Installer (tema verde) - All'enter di conferma per il boot resta un cursore fisso in alto su schermo nero :-( Qualche consiglio ? NB: In rete ho trovato anche una guida parziale per ZBook, ma é servita a poco... Link to comment Share on other sites More sharing options...
Supervisor. foskvs Posted July 12, 2019 Supervisor. Share Posted July 12, 2019 Togli VirtualSMC se stai già usando FakeSMC. Quali sono le specifiche hardware? Impostazioni del BIOS? Link to comment Share on other sites More sharing options...
ziocharly Posted July 12, 2019 Author Share Posted July 12, 2019 Grazie @foskvs per l'immediato feedback, Hardware: Processore > I7-8750H Ram > 32 GB DDR4 2666 SSD > Silicon Power SSD PCIe M.2 NVMe 512GB (aggiuntivo dedicato) Video > Integrato Intel UHD graphics 630 - Aggiuntivo, NVidia Quadro P2000 Card rete > Intel I219LM Gigabyte WiFi > Intel AC9560 dual band Bios: Impostato come suggerito in rete (TonyMacX86) - UEFI boot is enabled (hybrid/with CSM for best result) - secure boot is disabled - disabled fast boot - IGPU graphics memory set to 64mb - disabled the serial port via BIOS option - disabled "LAN/WLAN switching" - disabled "Extended Idle Power States" - disabled "Wake on LAN" and "Wake on USB" - disabled Firewire/IEEE 1394 Link to comment Share on other sites More sharing options...
Supervisor. foskvs Posted July 12, 2019 Supervisor. Share Posted July 12, 2019 Allega la EFI. Se hai usato tool di tonymac per crearla, segui la guida di @Gengik84[/mention] in Guide/Installazione, in quanto tali tool non sono supportati. Link to comment Share on other sites More sharing options...
ziocharly Posted July 12, 2019 Author Share Posted July 12, 2019 No, per ora, ho usato la guida di Gengik84, con le note del mio primo post. Ho tolto 'VirtualSMC' ma non cambia nulla... Allego la EFI in uso. Link to comment Share on other sites More sharing options...
Administrators Gengik84 Posted July 12, 2019 Administrators Share Posted July 12, 2019 La efi sembra ok prova a mettere KernelPM sul config Link to comment Share on other sites More sharing options...
ziocharly Posted July 12, 2019 Author Share Posted July 12, 2019 @Gengik84[/mention] , con KernelPM sparisce anche il cursore in alto, solo black screen... :-( Link to comment Share on other sites More sharing options...
Administrators Gengik84 Posted July 13, 2019 Administrators Share Posted July 13, 2019 molto strano, prova a ricreare la usb sun un altro supporto e possibilmente non superiore a 16gb, usando create install media andrebbe bene anche da 8gb quindi in caso puoi partizionare Link to comment Share on other sites More sharing options...
Supervisor. foskvs Posted July 13, 2019 Supervisor. Share Posted July 13, 2019 Configura un SMBIOS sul config.plist Visto l'hardware direi un MacBookPro15,x Link to comment Share on other sites More sharing options...
ziocharly Posted July 13, 2019 Author Share Posted July 13, 2019 Notte insonne, dopo 1000 prove, qualche risultato : Sul config.plist eliminato flag: Genera pstates Genera cstates Ora, dopo la scelta di 'USB installer' su Clover, finalmente prosegue, arriva ad una schermata dove chiede di abilitare la testiera bluetooth senza via di uscita... Disabilitato quindi il bluetooth e arriva la prima schermata dell'installer anche se con il verbose preoccupante: https://postimg.cc/XBMLVQt9"> Quindi formattato il nuovo SSD NVMe in APFS e ho potuto lanciare l'installazione. https://postimg.cc/vgP1hBtT"> Conclude la prima fase, ma al reboot appare questo errore (non bloccante) del bios : https://postimg.cc/wy3x6kDx"> Inizia la seconda fase, di 10 minuti circa, e finalmente : https://postimg.cc/7Gqs7BKD"> emoticon_applausi Sfortunatamente é solo l'inizio, infatti : > Non vanno ne la tastiera, ne il touch pad (solo mouse e keyboard USB esterne) > Non va la rete, ne filare, ne wifi > Non ho ne audio, ne bluetooth Comunque un gran bel passo in avanti !!! Ora sto cercando di consolidare il post, cercando come prima cosa di il boot diretto da SSD... Link to comment Share on other sites More sharing options...
Baio77 Posted July 13, 2019 Share Posted July 13, 2019 Ok posta a questo punto la Clover stai usando in più https://www.macos86.it/MacOS86_Downloads/?path=Applicazioni/Info">MacOS86_Downloads/?path=Applicazioni/Info">https://www.macos86.it/MacOS86_Downloads/?path=Applicazioni/Info scarica IORegistryExplorer e DCPI Manager 2.1 eseguili salva il report x IORegistryExplorer e fai foto DCPI Manger sezione status e PCI List X il boot da SSD , basta che prendi la EFI della USB e la copi nella EFI dell'SSD , il gioco è fatto , prova ad avviare da SSD impostando il boot da esso =) Link to comment Share on other sites More sharing options...
Administrators Gengik84 Posted July 13, 2019 Administrators Share Posted July 13, 2019 "ziocharly" post_id="38293" time="1563007725" user_id="220"> Notte insonne, dopo 1000 prove, qualche risultato : Sul config.plist eliminato flag: Genera pstates Genera cstates mi sembra molto molto strano questo... il tutto è eseguito solo dopo che è iniziato il boot Link to comment Share on other sites More sharing options...
ziocharly Posted July 14, 2019 Author Share Posted July 14, 2019 Ho aggiornato Clover alla V.4988 su USB e non riesco più a fare il boot in alcun modo... Mio azzardo fatale, mi sa che devo rifare tutto il giro. @Baio77, appena torno in bolla lo faccio subito ! Link to comment Share on other sites More sharing options...
Support Team iCanaro Posted July 14, 2019 Support Team Share Posted July 14, 2019 scusa ma non hai una pendrive per avvii di emergenza??? se negativo, molto male! essere appesi ad una sola opportunità di avvio comporta dei rischi. da clover 4988 sono cambiate parecchie cose probabilmente se usavi aptiomemoryfix questi è stato cancellato... se hai anche una partizione windows avvialo, poi monti la EFI con minitool partition wizard e gli assegni una lettera poi la browsi con total commander o explore++ avviato come admin e controlli in driver64UEFI che cosa manca e lo aggiungi a mano estrapolandolo dal clover in ISO Link to comment Share on other sites More sharing options...
ziocharly Posted July 15, 2019 Author Share Posted July 15, 2019 @iCanaro[/mention] si, ho fatto cosi e aggiunto i driver mancanti su USB e SSD. Ora fa il boot da entrambi ma ho questa sfilza di warning prima di arrivare alla schermata di Clover : https://postimg.cc/f30SDMYN"> ma senza altre controindicazioni... Fra l'altro ho aggiunto in clover/kext/10.14 due driver di Rehamman IntelMausiEthernet e VoodooPS2controller e ho finalmente tastiera interna, touchpad e rete cablata !!! Ho riabilitato anche il bluetooth da bios, ma NON trova alcun dispositivo... Per un utilizzo accettabile manca ancora: > wifi (manca) > audio (manca) Per un utilizzo completo: > card video NVidia P2000 (non é vista) > sospensione (ora va in crash e tocca rifare il boot) > ctrl batteria (non disponibile) > bluetooth (c'é ma non trova nulla) > errore bios real time clock (una tantum all'accensione) Opzionale: > card reader > thunderbolt @Baio77[/mention] Stasera seguo quanto mi hai consigliato ! GRAZIE a tutti per i preziosi consigli, alla fine si potrà fare una guida completa per chi ha lo ZBook 17 G5 Link to comment Share on other sites More sharing options...
Supervisor. foskvs Posted July 15, 2019 Supervisor. Share Posted July 15, 2019 Wifi e Bluetooth non sono compatibili. Per la batteria, inserisci APCIBatteryManager o il plugin di Lilu se usi VirtualSMC. Per l’audio, inserisci AppleALC e prova i layout supportati dal tuo codec (puoi usare audiocodecinfo per scoprirli). Per la scheda video, allega ioreg. Per Thunderbolt, imposta il bios correttamente. Visto che hai un Dell, prova a impostarlo come il mio in firma (vedi link). Non garantisco nulla, ma potrebbe funzionare. Link to comment Share on other sites More sharing options...
Support Team iCanaro Posted July 15, 2019 Support Team Share Posted July 15, 2019 non credo sia un DELL, certo che mettere il link al sito del proprio prodotto deve essere una cosa veramente difficile, visto che praticamente non lo fa quasi mai nessuno :( dovrebbe essere questo https://www8.hp.com/it/it/workstations/product-details/18865648">https://www8.hp.com/it/it/workstations/ ... s/18865648">https://www8.hp.com/it/it/workstations/product-details/18865648 Link to comment Share on other sites More sharing options...
Supervisor. foskvs Posted July 15, 2019 Supervisor. Share Posted July 15, 2019 Mea culpa, ho letto Precision. emoticon_risata Sì, gli Zbook sono HP. In ogni caso, dipende molto dalle impostazioni del bios. Consulta il manuale per il tuo prodotto. Link to comment Share on other sites More sharing options...
ziocharly Posted July 15, 2019 Author Share Posted July 15, 2019 Si é un HP, corretto il link, i dettagli sono nei primi post all'inizio del thread. Brutta notizia Wifi e BT non compatibili ! Cambio la wifi card...?! L'audio Conexant dovrebbe essere layout 15, stasera con AppleALC altro giro di prove... Link to comment Share on other sites More sharing options...
Administrators Gengik84 Posted July 15, 2019 Administrators Share Posted July 15, 2019 beh si devi cambiare il wifi...cosa assai comune :) Link to comment Share on other sites More sharing options...
ziocharly Posted July 15, 2019 Author Share Posted July 15, 2019 @Gengik84[/mention] , hai qualche suggerimento al volo per Mojave come brand e modello... Qualcosa ho in casa. Link to comment Share on other sites More sharing options...
Support Team iCanaro Posted July 15, 2019 Support Team Share Posted July 15, 2019 lista wi-fi compatibili https://www.macos86.it/viewtopic.php?p=44#p44">viewtopic.php?p=44#p44">https://www.macos86.it/viewtopic.php?p=44#p44 Link to comment Share on other sites More sharing options...
ziocharly Posted July 15, 2019 Author Share Posted July 15, 2019 @iCanaro[/mention] GRAZIE 1000 ! Link to comment Share on other sites More sharing options...
ziocharly Posted July 15, 2019 Author Share Posted July 15, 2019 Aggiornamento: > Msg al boot: problema legacy APFS Container scan risolto seguendo il thread: https://www.tonymacx86.com/threads/blocksize-512legacyapfscontainerscan-block-device-not-supportedsuccess.270417/">https://www.tonymacx86.com/threads/bloc ... ss.270417/">https://www.tonymacx86.com/threads/blocksize-512legacyapfscontainerscan-block-device-not-supportedsuccess.270417/ una volta corretti i driver i messaggi al boot sono spariti... > Audio: AppleALC, installato kext 1.3.9, provati layout 3 e 15, ma nessun risultato. (Lilu.kext V.1.3.7) Allego feedback di AudioCodecInfo: ************************************************************************** + Codec: (Unknown) + AppleALC ************************************************************************** Checking GPUs and Audio... Matched Device: IGPU IGPU is already named correctly IGPU has property hda-gfx = IGPU address is PciRoot(0x0)/Pci(0x2,0) for more information, read the wiki use it if you need to inject properties ----------------------------------------------------------------------------- Matched Device: GFX0 GFX0 is already named correctly GFX0 has property hda-gfx = GFX0 address is PciRoot(0x1)/Pci(0x0,0) for more information, read the wiki use it if you need to inject properties ----------------------------------------------------------------------------- Matched Device: HDEF HDEF is already named correctly HDEF address is PciRoot(0x0)/Pci(0x1f,3) for more information, read the wiki use it if you need to inject properties ----------------------------------------------------------------------------- Matched Device: HDAU HDAU has property hda-gfx = HDAU address is PciRoot(0x1)/Pci(0x0,1) for more information, read the wiki use it if you need to inject properties ----------------------------------------------------------- > Verifica stato batteria installato ACPIBatteryManager.kext in 'clover/kext/10.14' ma cercando di spuntare lo stato batteria in impostazioni, appare per un secondo l'icona e poi se ne va :-( > Ibernazione con HibernationFixup.kext sembra non andare + in crash ! Ha scritto dopo 12 minuti 24 secondi: @Baio77[/mention], Ecco la situazione : https://postimg.cc/dZjTQhLF"> https://postimg.cc/Z9vBB7CV"> IO_Service.zip Link to comment Share on other sites More sharing options...
Support Team iCanaro Posted July 15, 2019 Support Team Share Posted July 15, 2019 ma secondo te hai risolto il problema piazzando dei driver del 2018 o perché hai messo il driver APFS nella cartella legacy drivers64 che se era come nella prima EFI che hai postato era assente?! io non ho ancora capito quale codec audio hai... l'hai scritto da qualche parte? PS: poi se è un notebook recente la parte legacy non serve a niente, si usa in UEFI puro... :( una volta installato, ma anche prima, è molto propedeutico leggere qui https://www.macos86.it/viewtopic.php?f=2&t=14">viewtopic.php?f=2&t=14">https://www.macos86.it/viewtopic.php?f=2&t=14 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now