Jump to content

[Guide]VirtualBox on Sonoma and AMD Hackintosh

tomnic

By tomnic
in Guide

 Share

Recommended Posts

  • Moderators
tomnic Senior Member

tomnic

Posted
  • Moderators
Posted

Virtualization on AMD based Hackintosh on Sonoma real hardware... possible!
 
The key program is Virtualbox 6.1.46 or its minor latest updates + related USB 3 extensions, where the code to support AMD-V/SVM are still present. VirtualBox 7 is not ok because it only works with VT-X/VT-D owned only by Intel CPUs now, nobody created a wrapper yet.
 
But how can we get Virtualbox running on recent macOS? The prerequisite is to disable SIP and use the AMFIpass.kext with the bootflag -amfipassbeta in order to allow VirtualBox kexts to be loaded once installed, nothing more. In fact, once rebooted and allowed the kexts to run in Security section you can even disable the loading of AMFIpass.kext and remove the related bootflag, by now the kexts have bypassed the blacklist, forever!
 
After that you can also install Windows 11 as a VM, direct without any issue, and the performance is also great if you don't overdo the number of cores (my maximum is 2 then it starts to slow down)!!!
 
Me and @fabiosun have also experimented with various macOS: all of them work with the original ISO/DMGs starting from Tiger Server to Monterey... probably Ventura and Sonoma need an updated bootloader than the internal EFI one (which I'd like to understand what it is because it even performs better than clover and OC imho).
 
Let's go through all the attempts made with the various macOS, as there is often a need for CPU spoofing since we have an AMD based host. For all Apple VMs the GPU will be emulated in EFI and should be set with 128Mb or where possible 256Mb RAM.

 

Starting from Mojave till Monterey use the Mac OS X 64 bit template. Don't give more than 2 virtual CPUs to the VM or it will slow down. Set in Ports, USB -> USB 3.0 Controller (xHCI), hence the need to have VBox extensions installed. Set everything as per the screenshots where I do not specify anything else.

 

image.thumb.png.8e06460cb76ee4b4e338b1829dc19e66.png

 

image.thumb.png.9450726815440dfbec0cad926fdaf390.png

 

image.thumb.png.f9f6ca105491ff2c42c8c0232816a8a5.png

 

image.thumb.png.485b0778bb35e2f415d10c4e824d7323.png

 

image.thumb.png.fbbe7d434b6fd83533ae47c86e707194.png

 

image.thumb.png.15fa9d490605e24b43ee76b5136e1cc6.png

 

image.thumb.png.f596fbe0e907cba2589e2ddce618ee8c.png

 

image.thumb.png.cc1fb2a2ace69be0f29423dbd82e4b75.png

 

image.thumb.png.3ebb8910dfbbb976cb7f100eaec5374f.png

 

image.thumb.png.59072ac79cf5c0e7fff603e69c11b83b.png

 

With Tiger, I was only able to start the installation via Tiger Server 10.4.7 since the previous stock kernels do not work even with spoof. If we create the virtual machine with the name Tigro, the following commands are needed to start the installation, after selecting Mac OS X and Mac OS X 32 bit as Guest OS. Also set ICH6 as the controller for the disks, IDE. It is mandatory to choose only one CPU as processor otherwise we will have a panic:

  

tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion EFI32..Virtual.Box                                           
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal/Devices/efi/0/Config/DmiSystemProduct "MacBookPro3,1"                                            
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-2BD1B31983FE1663"  
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal/Devices/efi/0/Config/DmiUseHostInfo 0   
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Tigro --cpu-profile 'Intel Pentium 4 3.00GHz'
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Tigro --cpuidset 00000000 00000004 756e6547 6c65746e 49656e69         
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Tigro --cpuidset 00000001 00000f43 00020800 fbffffff ffffffff
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Tigro --cpuidset 80000001 00000000 00000000 ffffffff ffffffff
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal/Devices/smc/0/Config/DeviceKey "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC 1   
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Tigro VBoxInternal2/EfiGraphicsResolution 1280x800

 

The startup speed is impressive! Here it is as I am upgrading the operating system to 10.4.11:

 

image.thumb.png.95a8407e488628067c7508aa0387019d.png

 

For Snow Leopard select Mac OS X and Mac OS X 64-bit Snow Leopard, always one CPU. I used a retail installation DVD version 10.6.7 in ISO format. Startup always lightning fast! These are the commands by calling Snow the VM:

  

tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Snow --cpu-profile "Intel Xeon X5482 3.20GHz"    
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Snow --cpuidset 00000000 00000004 756e6547 6c65746e 49656e69     
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Snow --cpuidset 00000001 00000f43 00020800 fbffffff ffffffff  
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Snow --cpuidset 80000001 00000000 00000000 ffffffff ffffffff     
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Snow VBoxInternal2/EfiGraphicsResolution 1280x800

 

image.thumb.png.324c27b7a83f8e5967b517bbd8cdde4d.png

 

@fabiosun reports to me that the lines with cpuid definitions are redundant. You can omit them!

 

For El Capitan always create a virtual machine by choosing Mac OS X 64 bit El Capitan from the templates, only strings to enter by hand, assuming you have named it ElCap:

  

tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm ElCap --cpu-profile "Intel Xeon X5482 3.20GHz"                                                                    
tomnic@MacProAMD ~ % /Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata ElCap VBoxInternal2/EfiGraphicsResolution 1280x800

 

To create the iso I used the script https://gist.github.com/coolaj86/8c36d132250163011c83bad8284975ee. Place script and downloadable file directly from Apple InstallMacOSX.dmg in your home, give chmod +x to the script and run it. You will always get the el-capitan.iso file in your home ready for installation.

 

Note that you can also use 2 CPUs this time, increasing the number as well as slowing down the boot may generate panic so watch out.

 

image.thumb.png.522b33644196b191d0f7d985dc085e67.png

 

For other versions of Mac OS X we will have to create the bootable media suitable for VBox ourselves.

 

For Mavericks after downloading from the App Store and copying Install Mac OS Mavericks to the Applications folder we need to create a temporary 8 Gb blank volume using disk utility, File, New Image, Blank Image:

 

image.thumb.png.8e5772145ccc1f812c0dbb6591482c1f.png

 

The command to create the bootable media is:

  

sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Mavericks --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction

 

We must then convert it to a disk image for VBox because an ISO would return an error since the Mavericks installation app must reside on a medium where it can also be written to:

  

/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/Mavericks.dmg ~/Desktop/Mavericks.vdi

 

Now the commands to be able to run the VM, named Mav, are:

  

/Applications/VirtualBox.app/Contents/MacOS/VBoxManage modifyvm Mav --cpu-profile "Intel Xeon X5482 3.20GHz"  
/Applications/VirtualBox.app/Contents/MacOS/VBoxManage setextradata Mav VBoxInternal2/EfiGraphicsResolution 1280x800

 

Create a Mac OS X 64 bit Mavericks VM, you can also use 2 CPUs, add among the storage devices a Hard Disk and give it the Mavericks.vdi image. Bring in Hard Disk as the first boot device. Inside the VM, before partitioning the virtual disk where you will install Mavericks, open Terminal and type:

  

date 0202020216

 

Proceed slowly with partitioning and you will have Mavericks installed.

 

image.thumb.png.05ed2f0a76409616161b539da8638a68.png

 

For Yosemite proceed similarly, mutatis mutandis. The command for the date is:

  

date 1020170014

 

image.thumb.png.38f8b2de22c1f254714ac46274469387.png

 

From Catalina on up an empty 16384 MB image must be created in disk utility. To get the Installers from High Sierra and up use our blazoned Runme_downloaderV4 which I attach.

 

The commands to create the bootable and writable installation media are respectively:

  

sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/HighSierra
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Mojave
sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Catalina
sudo /Applications/Install\ macOS\ Big\ Sur.app/Contents/Resources/createinstallmedia --volume /Volumes/BigSur
sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/Monterey

 

...and to generate the bootable vdi disk:

  

/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/HighSierra.dmg ~/Desktop/HighSierra.vdi   
/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/Mojave.dmg ~/Desktop/Mojave.vdi
/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/Catalina.dmg ~/Desktop/Catalina.vdi
/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/BigSur.dmg ~/Desktop/BigSur.vdi
/Applications/VirtualBox.app/Contents/MacOS/VBoxManage convertdd ~/Desktop/Monterey.dmg ~/Desktop/Monterey.vdi

 

In particular, to allow, for example, the installation of Big Sur, assuming you have called the VM Mac, the commands to be given are:

  

/Applications/VirtualBox.app/Contents/macOS/VBoxManage modifyvm mac --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff
/Applications/VirtualBox.app/Contents/macOS/VBoxManage modifyvm mac --cpu-profile "Intel Core i7-6700K"
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac19,1"
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0"
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac “VBoxInternal2/EfiGraphicsResolution 1280x800
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/TM/TSCMode" "RealTSCOffset"
/Applications/VirtualBox.app/Contents/macOS/VBoxManage setextradata mac "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-AA95B1DDAB278B95"

 

image.thumb.png.352fb3aa6656a7c6cdb1242817d4e663.png

 

The installation of Ventura and Sonoma is under consideration... for now they crash during the second pass of Sealing... I will try loading a generic OpenCore. Stay tuned!

RunMe_DownloaderV4.zip

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
  • tomnic changed the title to [Guide]VirtualBox on Sonoma and AMD Hackintosh
  • fabiosun pinned this topic
  • 3 months later...
pcmaclover Junior Member

pcmaclover

Posted
Posted

I am trying to run Sonoma in a VM using VirualBox on Ryzen 3700 PC Build.  Once I added the --cpu-profile line, I was able to start the OS install process, however kernel panic happened.  

Link to comment
Share on other sites
Driftwood Senior Member

Driftwood

Posted
Posted (edited)
On 11/13/2023 at 11:06 AM, tomnic said:

But how can we get Virtualbox running on recent macOS? The prerequisite is to disable SIP and use the AMFIpass.kext with the bootflag -amfipassbeta in order to allow VirtualBox kexts to be loaded once installed, nothing more. In fact, once rebooted and allowed the kexts to run in Security section you can even disable the loading of AMFIpass.kext and remove the related bootflag, by now the kexts have bypassed the blacklist, forever!
 
After that you can also install Windows 11 as a VM, direct without any issue, and the performance is also great if you don't overdo the number of cores (my maximum is 2 then it starts to slow down)!!!

Hi Tomnic,

Nice guide.

 

Ive tried this with 6.1.50 and everything working installing Win 10 guest into the Box Host on Sonoma(in the process installing Win 32bit apps I needed  etc...)  but on reboot and resetting NVRAM SIP to 0000000 & removing the AMFIPass kext in config.plist its back to the kernel error cant load. Any info on this?

BTW I used AMFIPass v1.40 and didn't require the bootflag -amfipassbeta

 

amfipasskextandnvramconfigplistsettings.thumb.jpg.7ecfedc63cceb0f723583fe2d5b25be1.jpg

 

METHODOLOGY

 

1. In config.plist (see image) inside your boot EFI, Add the numbers csr-active-config = 03080000 (see image)  into the NVRAM section of config.plist (to workaround security & Privacy Oracle Box kext sign problems with this partial SIP disable).

2.  Add AMFIPass.kext details (see image) into kernel section of config.plist.  Save config.plist back to the EFI /OC folder.

3. Download version 1.40 of AMFIPass.kext and copy it over onto your EFI drive's Kext folder.

4. Ensure you can reset NVRAM in Opencore when rebooting

5. Reboot, and hit space, number to reset your NVRAM.
6. Now it should boot with your SIP disabled and use AMFIpass to allow the box kernel thru.

7. Download & install Vbox v.6.1.48 or 6.1.50

8. During the installation process it should ask you to sign / allow the Oracle Virtual Box / ALLOW it inside your 'System Settings' Security & privacy section.

9. After install and the kernel of box has been signed it will ask to reboot. Go ahead and reboot.
10. After reboot, locate and download/install Oracle_VM_VirtualBox_Extension_Pack-6.1.50.vbox-extpack (if using ver 6.1.50)

11. Now grab a ISO from Microsoft and install your guest OS - in my case it was Windows 10 32 bit iso

12. Go thru the motions of installing the guest OS like you normally would.

13. Locate and download VBoxGuestAdditions_6.1.50.iso or VBoxGuestAdditions_6.1.48.iso and install them from a guest ISO storage drive.This will provide a number of addition hardware features and functionality.

14. Finally, fine tune your guest OS for display USB pointing devices etc...

15. If you get problems running virtual box - quit Vbox completely (stop any guest VMs running first if you can) and then rerun it by running it from within Applications folder and not as an alias as sometimes aliases get corrupted or lose sight of the software.

16 I tried then resetting SIP to Enabled and disabling AMFIPass kext inside config plist Kernel section, reboot, resetting NVRAM and booting up to Sonoma but the Kernel errors reappeared and I found they were no longer 'Allowed' by the OS. Subsequently, virtual box guest VM's failed to start. 😞

17. So went back to partially Disabling SIP (csr-active-config = 03080000) but didn't require AMFIPass to ON now that Ive installed vBox.

 

More on this soon...

 

useful links:

Virtual Box Old Builds: https://www.virtualbox.org/wiki/Download_Old_Builds_6_1

and https://download.virtualbox.org/virtualbox/6.1.50/ to find the Guest Additions etc...

AMFIPass kext: https://community.macmeup.com/index.php?/files/category/3-kexts/. or payloads/Kexts/Acidanthera/AMFIPass-v1.4.0-RELEASE.zip

 

Win10inSonoma.thumb.jpg.ec06d57dea81c3c7fd96f2112c7f092c.jpg

Edited by Driftwood
forgot a few points
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
  • Moderators
tomnic Senior Member

tomnic

Posted
  • Author
  • Moderators
Posted
On 3/22/2024 at 3:14 PM, pcmaclover said:

I am trying to run Sonoma in a VM using VirualBox on Ryzen 3700 PC Build.  Once I added the --cpu-profile line, I was able to start the OS install process, however kernel panic happened.  

 

As I've specified in the bottom of the thread Ventura and Sonoma are not supported as guest os right now, I'm investigating and probably the issue is that AVX2 CPU extensions are required for these two latest releases of macOS and they are not passed to the VM. Probably with a custom OC EFI and CryptexFixup.kext it could work but I need to test it.

  • Like 1
Link to comment
Share on other sites
  • Moderators
tomnic Senior Member

tomnic

Posted
  • Author
  • Moderators
Posted
52 minutes ago, Driftwood said:

Hi Tomnic,

Nice guide.

 

Ive tried this with 6.1.50 and everything working installing Win 10 guest into the Box Host on Sonoma(in the process installing Win 32bit apps I needed  etc...)  but on reboot and resetting NVRAM SIP to 0000000 & removing the AMFIPass kext in config.plist its back to the kernel error cant load. Any info on this?

BTW I used AMFIPass v1.40 and didn't require the bootflag -amfipassbeta

 

Thanks for your appreciation on my guide, probably resetting the nvram parameters recreates the kext blacklist, I'm on 6.1.48 right now and I'll try with 6.1.50.

Yes the new AMFIPass doesn't require the specific bootflag, I'll update the guide.

  • Like 1
Link to comment
Share on other sites
Driftwood Senior Member

Driftwood

Posted
Posted
3 hours ago, tomnic said:

 

Thanks for your appreciation on my guide, probably resetting the nvram parameters recreates the kext blacklist, I'm on 6.1.48 right now and I'll try with 6.1.50.

Yes the new AMFIPass doesn't require the specific bootflag, I'll update the guide.

@tomnic Ive updated the above to see if you spot any additions I need!

Link to comment
Share on other sites
Driftwood Senior Member

Driftwood

Posted
Posted (edited)

@tomnic As I'm currently using Sonoma 14.2 (23C64) apparently there was a cursor / pointing device bug with this version of the OS from what I was reading somewhere and I think its not been helping the vbox guests with sluggish 'forgetful' performance. Whats the latest version of Sonoma (14.4.1) been like with pointer control in VBox guests?

Edited by Driftwood
Link to comment
Share on other sites
  • 2 weeks later...
Xsario Junior Member

Xsario

Posted
Posted
On 3/28/2024 at 2:38 PM, Driftwood said:

METHODOLOGY

 

1. In config.plist (see image) inside your boot EFI, Add the numbers csr-active-config = 03080000 (see image)  into the NVRAM section of config.plist (to workaround security & Privacy Oracle Box kext sign problems with this partial SIP disable).

2.  Add AMFIPass.kext details (see image) into kernel section of config.plist.  Save config.plist back to the EFI /OC folder.

3. Download version 1.40 of AMFIPass.kext and copy it over onto your EFI drive's Kext folder.

4. Ensure you can reset NVRAM in Opencore when rebooting

5. Reboot, and hit space, number to reset your NVRAM.
6. Now it should boot with your SIP disabled and use AMFIpass to allow the box kernel thru.

7. Download & install Vbox v.6.1.48 or 6.1.50

8. During the installation process it should ask you to sign / allow the Oracle Virtual Box / ALLOW it inside your 'System Settings' Security & privacy section.

9. After install and the kernel of box has been signed it will ask to reboot. Go ahead and reboot.
10. After reboot, locate and download/install Oracle_VM_VirtualBox_Extension_Pack-6.1.50.vbox-extpack (if using ver 6.1.50)

11. Now grab a ISO from Microsoft and install your guest OS - in my case it was Windows 10 32 bit iso

12. Go thru the motions of installing the guest OS like you normally would.

13. Locate and download VBoxGuestAdditions_6.1.50.iso or VBoxGuestAdditions_6.1.48.iso and install them from a guest ISO storage drive.This will provide a number of addition hardware features and functionality.

14. Finally, fine tune your guest OS for display USB pointing devices etc...

15. If you get problems running virtual box - quit Vbox completely (stop any guest VMs running first if you can) and then rerun it by running it from within Applications folder and not as an alias as sometimes aliases get corrupted or lose sight of the software.

16 I tried then resetting SIP to Enabled and disabling AMFIPass kext inside config plist Kernel section, reboot, resetting NVRAM and booting up to Sonoma but the Kernel errors reappeared and I found they were no longer 'Allowed' by the OS. Subsequently, virtual box guest VM's failed to start. 😞

17. So went back to partially Disabling SIP (csr-active-config = 03080000) but didn't require AMFIPass to ON now that Ive installed vBox.

 

More on this soon...

 

useful links:

Virtual Box Old Builds: https://www.virtualbox.org/wiki/Download_Old_Builds_6_1

and https://download.virtualbox.org/virtualbox/6.1.50/ to find the Guest Additions etc...

AMFIPass kext: https://community.macmeup.com/index.php?/files/category/3-kexts/. or payloads/Kexts/Acidanthera/AMFIPass-v1.4.0-RELEASE.zip

 

 

HI @Driftwood, 
Thank you for this wonderful guide. I have used your metrology and installed the Virtualbox on my Ryzentosh system. 

It's working perfectly. 🫠
 

  • Like 1
Link to comment
Share on other sites
  • 4 months later...
Other Junior Member

Other

Posted
Posted

Thank you very much for the guide @tomnic and @Driftwood. It works perfectly for VirtualBox 6.1.50 on my AMD hack Sonoma host, but I cannot get it to work on Ventura 13.6.9 on the same box using the same OC config (AMFIPass.kext confirmed loaded in Ventura).

 

The odd thing is that the virtualbox kexts are loaded on Ventura without requiring any confirmation in Settings/Security (which is the finicky part on Sonoma): 

% kextstat -l | grep -i virtualbox
Executing: /usr/bin/kmutil showloaded --list-only
No variant specified, falling back to release
  181    3 0xffffff7f9710e000 0xb8ff2    0xb8ff2    org.virtualbox.kext.VBoxDrv (6.1.50) 20DAAA76-AAB6-3E00-A62C-FCEB45D80CD1 <9 7 6 3 1>
  182    0 0xffffff7f971f4000 0x4ffa     0x4ffa     org.virtualbox.kext.VBoxUSB (6.1.50) 043FF80E-90D5-375A-842C-623AEF17A4B5 <181 180 74 9 7 6 3 1>
  183    0 0xffffff7f971ef000 0x3ffc     0x3ffc     org.virtualbox.kext.VBoxNetFlt (6.1.50) 3B8D8513-6061-3C02-8E8B-5ADA4EB2B341 <181 9 7 6 3 1>
  184    0 0xffffff7f971e9000 0x1ff3     0x1ff3     org.virtualbox.kext.VBoxNetAdp (6.1.50) DD5AADC9-DC49-33F1-8FAF-C5166E143C51 <181 7 6 1>

 

...but yet VirtualBox gives the standard "Result Code:  NS_ERROR_FAILURE (0x80004005)" error when I try to launch any guest.

 

I'm in the process of upgrading this box from Catalina to Ventura or Sonoma, and the broken Wi-Fi in Sonoma is making me strongly consider Ventura for now. However, I need Box so it's a conundrum. I really imagined that if it worked for the more locked down Sonoma it would be straightforward for Ventura.

 

Any thoughts? Thanks again; without this guide, I wouldn't even have the option for Sonoma.

Link to comment
Share on other sites
  • Moderators
tomnic Senior Member

tomnic

Posted
  • Author
  • Moderators
Posted

I don't think this works with Ventura, but feel free to double check that SIP is disabled and then try to manually issue these commands despite you see the kext loaded:

  

sudo kextunload -b org.virtualbox.kext.VBoxDrv
sudo kextunload -b org.virtualbox.kext.VBoxNetFlt
sudo kextunload -b org.virtualbox.kext.VBoxNetAdp
sudo kextunload -b org.virtualbox.kext.VBoxUSB

sudo kextload -b org.virtualbox.kext.VBoxDrv
sudo kextload -b org.virtualbox.kext.VBoxNetFlt
sudo kextload -b org.virtualbox.kext.VBoxNetAdp
sudo kextload -b org.virtualbox.kext.VBoxUSB

 

It may tell you that you have to “Approve in System Preferences...”

Then open up System Preferences (check to see if you need to “approve” anything under Privacy & Security). It may also tell you to reboot to enable new extensions... or something like that

Reboot to have the kextload take effect, and try again

Link to comment
Share on other sites
Other Junior Member

Other

Posted
Posted (edited)

Thanks. SIP is disabled. The kext unload/load did not allow the VMs to start normally.

 

I found another forum that mentioned that VBox 6.1.x on Ventura will not start VMs in normal mode, but that headless mode will start and then you can remote desktop into the VM. Headless start (only) does appear to work in Ventura after following your Sonoma guide -- the "preview" thumbnail in VBox shows the guest running normally. I have no clue why that is and VBox does not appear to be able to give useful logs for the failure when launching in normal mode. It does not appear to be a function of the guest VM settings, as I have tried to disable/toggle as much as possible on multiple guest OS types and headless start does not have any issues.

 

Again, your guide works perfectly for Sonoma on AMD and VBox guests run normally, so apparently this broke in Ventura and was fixed in Sonoma.

Edited by Other
typo
  • Like 1
Link to comment
Share on other sites
  • Moderators
tomnic Senior Member

tomnic

Posted
  • Author
  • Moderators
Posted
6 minutes ago, Other said:

Thanks. SIP is disabled. The kext unload/load did not allow the VMs to start normally.

 

I found another forum that mentioned that VBox 6.1.x on Ventura will not start VMs in normal mode, but that headless mode will start and then you can remote desktop into the VM. Headless start (only) does appear to work in Ventura after following your Sonoma guide -- the "preview" thumbnail in VBox shows the guest running normally. I have no clue why that is and VBox does not appear to be able to give useful logs for the failure when launching in normal mode. It does not appear to be a function of the guest VM settings, as I have tried to disable/toggle as much as possible on multiple guest OS types and headless start does not have any issues.

 

Again, your guide works perfectly for Sonoma on AMD and VBox guests run normally, so apparently this broke in Ventura and was fixed in Sonoma.

 

Running well in Sonoma and not in Ventura is kinda weird for me too, but let's face it 😉 

Link to comment
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • There are no registered users currently online
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.