shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 @fabiosun Very first one works! Fully booted to system! WiFI stopped working. saying network preferences error. Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 Just now, shrisha said: @fabiosun Very first one works! Fully booted to system! WiFI stopped working. saying network preferences error. do not nothing 😛 which config was working? config-1? Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 1 minute ago, fabiosun said: do not nothing 😛 which config was working? config-1? yes config-1. but I didn't tried others Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 ok 1 minute ago, shrisha said: yes config-1. but I didn't tried others config-5.plist.zip try this and see if wifi works (if before it was working) Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 13 minutes ago, fabiosun said: ok config-5.plist.zip 5.86 kB · 1 download try this and see if wifi works (if before it was working) Yes now it works! Thank you very very much. So this is it? Or some fine tuning still required, possible? Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 6 minutes ago, shrisha said: Yes now it works! Thank you very very much. So this is it? Or some fine tuning still required, possible? check if GPU is working better or not and then you can try to use again also AMDRyzenCPUPowerManagement.kext and also you can try to put again verbose booting (-v option) Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 16 minutes ago, fabiosun said: check if GPU is working better or not and then you can try to use again also AMDRyzenCPUPowerManagement.kext and also you can try to put again verbose booting (-v option) What about Bluetooth ? Can I enable it too? Also can you please tell me how to hide OC log on a screen which shows before drives chooser? Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 Yes I think you can try to enable kext for bt to avoid first oc opencore verbose Lines you have to use a non debug version post if you want your efi without the kext to have a smaller zip or post your full efi in external link without attaching here thanks 42 minutes ago, shrisha said: What about Bluetooth ? Can I enable it too? Also can you please tell me how to hide OC log on a screen which shows before drives chooser? Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 3 hours ago, fabiosun said: Yes I think you can try to enable kext for bt to avoid first oc opencore verbose Lines you have to use a non debug version post if you want your efi without the kext to have a smaller zip or post your full efi in external link without attaching here thanks Yes bluetooth working now. And here is link to EFI https://mega.nz/file/sFJQkZhL#vMvz9_tmeiLBEcHV9UNSu-SeLawqCfIsFfrJ2C4oq5Q Also OC not remember last drive to boot from. Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 5 minutes ago, shrisha said: Yes bluetooth working now. And here is link to EFI https://mega.nz/file/sFJQkZhL#vMvz9_tmeiLBEcHV9UNSu-SeLawqCfIsFfrJ2C4oq5Q Also OC not remember last drive to boot from. Backup your working one and change only these attached Now Opencore is a non debug 079 release By the way With GPU have you the same weirdness you had with Clover? Archive 2.zip ah sorry to fix your last drive used to boot press control + return one time when you choose your booting drive in boot loader menu 1 Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 2 minutes ago, fabiosun said: Backup your working one and change only these attached Now Opencore is a non debug 079 release By the way With GPU have you the same weirdness you had with Clover? Archive 2.zip 349.43 kB · 0 downloads No, GPU is works great now. Vega 64 is old card and I'm planing to get 6900XT if my trexintosh will stable enough to fully move to Mac. My Titan RTX is out from computer for now, laying next to me in crying 🙂 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 4 minutes ago, shrisha said: No, GPU is works great now. Vega 64 is old card and I'm planing to get 6900XT if my trexintosh will stable enough to fully move to Mac. My Titan RTX is out from computer for now, laying next to me in crying 🙂 I have had also a Nvidia rtx 3090 in my rig If you use software which uses metal you will be very happy Trexintosh is one of the best pc you can have now 🙂 Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 (edited) I'm 3D artist. Autodesk Maya is my main app for a past 18 years. Main renderer is Vray but with 3970X speed in Arnold is practically identical to VrayGPU with Nvidia Optix. So I'm not that depend on Nvidia now. Actually I'm on Fedora linux for past two years. Performance is really great compare to Windows. Same scene will render by Arnold in Windows for 20% slower then in Linux. And I checked Macos is in between but in Mac I have all Adobe apps now, thanks to your patches 🙂 One more thing, config.plist from your last EFI folder for me, non debug, is clean from Platform info, UUID, serial number, etc. When I successfully boot with OC Maya licensing got broken. I have to clean uninstall and reinstall Maya just now. So if I change config again will I have to do it all over again? Edited March 8, 2022 by shrisha Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 @shrisha new way to patch all infamous (for and cpu in OSX) apps is a gold metal @tomnic, I have learned his methods with his help and I was a beta tester 🙂 1 Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 (edited) 9 minutes ago, fabiosun said: @shrisha new way to patch all infamous (for and cpu in OSX) apps is a gold metal @tomnic, I have learned his methods with his help and I was a beta tester 🙂 Oh! My gratitude to him then. One more thing, config.plist from your last EFI folder for me, non debug, is clean from Platform info, UUID, serial number, etc. When I successfully boot with OC Maya licensing got broken. I have to clean uninstall and reinstall Maya just now. So if I change config again will I have to do it all over again? And one more thing 🙂 M.2 SSD (non NVME) is not recognized in Monterey. All together in my motherboard is 2 NVME and 2 SSD in M.2 form factor. NVME is recognized but SSD is not. Normal SATA HDD and SSD is recognized with no problem. Do you have any thoughts on that? Should I try SATA-unsupported.kext or CtlnaAHCIPort.kext Edited March 8, 2022 by shrisha 1 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 I have not modified SMBIOS in last config posted I do not know well the kind of sata controller of your motherboard some motherboard needs of an additional kext for one on board controller you have to test @shrisha my MSI does not need of any additional kext for its fully functionality 🙂 Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 mmmh maybe I have misunderstood your problem SSD in M2 form? a picture please and where do you connect them? in a regular M2 slot? Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 (edited) 20 minutes ago, fabiosun said: mmmh maybe I have misunderstood your problem SSD in M2 form? a picture please and where do you connect them? in a regular M2 slot? Yes regular M2 slot. All drives are visible in Windows and Linux, Only macos is not seeing SATA M2 drive. Edited March 8, 2022 by shrisha Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 mmh i don't know exactly but that kind of M2 SSD connector in picture (SSD 860 evo) should not be good for your motherboard M2 slot but not sure @100% but if you see them in windows and linux I am wrong for sure 🙂 Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 8 minutes ago, fabiosun said: mmh i don't know exactly but that kind of M2 SSD connector in picture (SSD 860 evo) should not be good for your motherboard M2 slot but not sure @100% but if you see them in windows and linux I am wrong for sure 🙂 Yes I see them in WIndows and Linux. Both NVME and SSD in M2 slots This is from motherboard specifications: Integrated in the CPU: 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 4.0 x4/x2 SSD support) (M2M) 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2Q) Integrated in the Chipset: 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2P) 8 x SATA 6Gb/s connectors Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 @shrishawhat do you see from terminal if you type: diskutil list ? Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 (edited) 10 minutes ago, fabiosun said: @shrishawhat do you see from terminal if you type: diskutil list ? /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI NO NAME 629.1 MB disk0s1 2: Linux Filesystem 1.1 GB disk0s2 3: Linux Swap 34.4 GB disk0s3 4: Linux Filesystem 988.1 GB disk0s4 /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *250.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_APFS Container disk4 249.8 GB disk1s2 /dev/disk2 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *2.0 TB disk2 1: Windows_NTFS nitai 2.0 TB disk2s1 /dev/disk3 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *2.0 TB disk3 1: Windows_NTFS gaura 2.0 TB disk3s1 /dev/disk4 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +249.8 GB disk4 Physical Store disk1s2 1: APFS Volume MacSSD - Data 70.0 GB disk4s1 2: APFS Volume Preboot 270.1 MB disk4s2 3: APFS Volume Recovery 1.1 GB disk4s3 4: APFS Volume VM 1.1 MB disk4s4 5: APFS Volume MacSSD 15.8 GB disk4s5 6: APFS Snapshot com.apple.os.update-... 15.8 GB disk4s5s1 /dev/disk5 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk5 1: Windows Recovery 554.7 MB disk5s1 2: EFI NO NAME 104.9 MB disk5s2 3: Microsoft Reserved 16.8 MB disk5s3 4: Microsoft Basic Data Win 1.0 TB disk5s4 Seems like Disk1 and Disk4 is same device. Disk0 and Disk5 are NVME drives. Disk2 and Disk3 are normal HDDs. I have one more M2 SATA drive which is not visible. And actually I have one more NVME drive but in adapter which is in PCIE X16 port but this third part chipset and I'm not expecting to be recognized by Macos. Edited March 8, 2022 by shrisha Link to comment Share on other sites More sharing options...
Supervisor fabiosun Posted March 8, 2022 Supervisor Share Posted March 8, 2022 it should be your macOS disk (4) and its EFi partition(1) 4 minutes ago, shrisha said: PCIE X16 port adapter I use an ASUS adapter for my 960 pro Samsung and it works fine it boots also my windows 11 installed on it Link to comment Share on other sites More sharing options...
shrisha Posted March 8, 2022 Author Share Posted March 8, 2022 And this is from linux: Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors Disk model: SanDisk SD7SN3Q2 Disklabel type: gpt Disk identifier: F35ACEF5-FC24-5447-98AA-96872A5FA2D3 Device Start End Sectors Size Type /dev/sda1 2048 1230847 1228800 600M EFI System /dev/sda2 1230848 3327999 2097152 1G Linux filesystem /dev/sda3 3328000 20105215 16777216 8G Linux swap /dev/sda4 20105216 500117503 480012288 228.9G Linux filesystem Disk /dev/sdb: 1.82 TiB, 2000397852160 bytes, 3907027055 sectors Disk model: ST2000DL004 HD20 Disklabel type: dos Disk identifier: 0x1268dbe6 Device Boot Start End Sectors Size Id Type /dev/sdb1 * 2048 3907024895 3907022848 1.8T 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1.82 TiB, 2000397852160 bytes, 3907027055 sectors Disk model: ST2000DL004 HD20 Disklabel type: dos Disk identifier: 0x34702152 Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 3907024895 3907022848 1.8T 7 HPFS/NTFS/exFAT Disk /dev/sdd: 232.89 GiB, 250059350016 bytes, 488397168 sectors Disk model: Samsung SSD 850 Disklabel type: gpt Disk identifier: 4B1A3CBB-9D1F-439C-9AA2-3D5C8506B031 Device Start End Sectors Size Type /dev/sdd1 40 409639 409600 200M EFI System /dev/sdd2 409640 488397127 487987488 232.7G Apple APFS Disk /dev/sde: 465.92 GiB, 500277790720 bytes, 977105060 sectors Disk model: APPLE SSD SM0512 Disklabel type: dos Disk identifier: 0x396ba252 Device Boot Start End Sectors Size Id Type /dev/sde1 2048 977104895 977102848 465.9G 7 HPFS/NTFS/exFAT Disk /dev/nvme0n1: 953.87 GiB, 1024209543168 bytes, 2000409264 sectors Disk model: SAMSUNG MZVLW1T0HMLH-000L7 Disklabel type: gpt Disk identifier: 6AA2D2FE-28E9-44DC-9F5C-9D0918AB2F12 Device Start End Sectors Size Type /dev/nvme0n1p1 2048 1230847 1228800 600M EFI System /dev/nvme0n1p2 1230848 3327999 2097152 1G Linux filesystem /dev/nvme0n1p3 3328000 70436863 67108864 32G Linux swap /dev/nvme0n1p4 70436864 2000408575 1929971712 920.3G Linux filesystem Disk /dev/nvme1n1: 953.87 GiB, 1024209543168 bytes, 2000409264 sectors Disk model: SAMSUNG MZVLW1T0HMLH-000L7 Disklabel type: gpt Disk identifier: 80EA2866-0EBE-48E0-95CE-3C50A2241C0B Device Start End Sectors Size Type /dev/nvme1n1p1 2048 1085439 1083392 529M Windows recovery environment /dev/nvme1n1p2 1085440 1290239 204800 100M EFI System /dev/nvme1n1p3 1290240 1323007 32768 16M Microsoft reserved /dev/nvme1n1p4 1323008 2000408575 1999085568 953.2G Microsoft basic data You can see SDA and SDE which is here in Linux but missing in Macos. Link to comment Share on other sites More sharing options...
shrisha Posted September 2, 2022 Author Share Posted September 2, 2022 @fabiosun Oh God! I'm in trouble again 🙂 After update to 12.5 directly from 12.2.1 System is not booting anymore. Could you please help me to debug it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now