solved Gigabyte TRX40 AORUS MASTER (rev. 1.0)

[shrisha]

23 hours ago, fabiosun said:

Hi you have more here 🙂

Hello Fabio. Been trying to adopt your EFI for my computer for a day already with no success. Could you please help me with that? I really like clover, it's been always easy in a past and I hoped that it is still be like that but can't figured what cause hang during installation. All bios settings as it should and I removed TB aml from EFI since I don't have it on my motherboard. rest should be same I think but still not working out.

[fabiosun]

@shrishapost a your working EFi with OpenCore please

 

[shrisha]

1 hour ago, fabiosun said:

@shrishapost a your working EFi with OpenCore please

 

Thank you! I decide to go clover because my system just stoped booting with opencore around two weeks ago with no reason. That one what I'm attaching was last one to work and stopped working.

 

Edited March 2, 2022 by fabiosun

[fabiosun]

EFI.zipTry with this and post debug txt file you can find in your EFi partition (also if it does not start well)

thank you

 

@shrisha

[shrisha]

Thank you Fabio,

Ok I tried your EFI and here is a log file. It is boot into installation and I was looking installation log, after approx 40% on "syncing packages to disk" it is doing something more and reboot. I will try to take picture now.

logs.zip

[fabiosun]

@shrishanow here is lunch time

I see your log from my phone

it si wrong

many of your mmio whitelist is bad

we have to adjust them

[shrisha]

@fabiosun Do you need dsdt.aml? I have dumped one.

DSDT.zip

[fabiosun]

no need of your DSDT

TRX40 works without using it 

only a SSDT could be useful

We must to transform all skip 0 inside yellow square to skip 1

I will send you a config in few minutes

you don't have to change then anything in your bios

because MMIO are bios parameters dependant

 

[shrisha]

Ok great thank you. I took pictures of installation progress. May be it can be useful. One is very beginning of OC boot and rest is during installation. On a last one computer hung. 

log.zip

[fabiosun]

config.plist.zip

@shrisha

use this and before and booting delete old logs in your EFi partition

then post only new log created

thank you

[shrisha]

here is new log

opencore-2022-03-02-182222.zip

Restarted itself again after 40% on "enable to get fs for /Volumes/MacSSD/macOS Install Data"

Edited March 2, 2022 by shrisha

[fabiosun]

Now MMIO are fine

12 minutes ago, shrisha said:

here is new log

opencore-2022-03-02-182222.zip 12.61 kB · 1 download

use this

in boot menu press space bar then Reset NVRAM 

then try to boot

config.plist.zip

post where it hangs

Are you installing with a full installer USB?

or in which way?

Which OS?

I have inserted patches from High Sierra to Monterey so it is not your problem

In your bios have you 4g enabled?

if no enable it and then re post debug log

 

[shrisha]

4G disabled

[fabiosun]

enabling it it changes a couple of mmio

try if it starts and boots then post log to refine MMIO

if you can post also your main BIOS settings

 

[shrisha]

With last config OC not boot at all. See error in attachment. With and without 4G enabled in BIOS.

I created bootable USB drive with Monterely 12.2.1 from Olarila website. All recommanded settings in BIOS like sata - AHCI, 4G disabled etc from dortania guide. Re-size BAR is disabled as well.

Should I try different USB drive? This also can cause a problem? Or USB 2 port?

Edited March 2, 2022 by shrisha

[tomnic]

Have you updated bios to the latest revision?

[fabiosun]

28 minutes ago, shrisha said:

I created bootable USB drive with Monterely 12.2.1 from Olarila website

this is a problem 😛

try to create an USB with vanilla method 

problem you have now is a wrong NVRAM malfunction

usually it is possible to solve powering off your system

leave 4g On and try to boot fine again

then post debug txt to check MMIO list

 

[shrisha]

Ok downloading now. Will take sometime 😞 Didn't have this problems with Olarila images before.

[tomnic]

TRX40 systems are very delicate... Distros are too much rude for it!

[fabiosun]

hi @shrisha

you have to start with a bios settings

then with an Opencore debug versionn you discover your MMIO list

and you have to declare it in config as we did

then If you change something in BIOS as 4G or Resize bar you have to check your debug again to see if first MMIO are changed

 

it is better to use a vanilla method because our trx40 are pretty simple now to configure and we not need weird kext ingestion 🙂

 

I would also suggest you to update to latest your Motherboard bios to have latest agesa available for TRX40 AMD chipset

 

[fabiosun]

https://chriswayg.gitbook.io/opencore-visual-beginners-guide/hackintosh-opinions/olarila-not-recommended

@shrishait is not an our friend or user but a maintainer of OCAT guide (a tool to update easily your OpenCore EFI)

 

[shrisha]

Thank you so much guys. As soon as I will have vanilla installer and bios settings done I will try again to install and will report here.

[shrisha]

@fabiosun Ok I did everything, Updated BIOS to the latest. Bios settings. Vanilla installer from apple store on real MAC. And now with latest config from you it's hung in very beginning of booting. And I think I know what problem was before. Virtualization was enabled. Now I have 4g enabled resize-BAR AUTO and Virtualization disabled.

Edited March 2, 2022 by shrisha

[fabiosun]

post debug txt when you can

 

also a Hang photo 

[fabiosun]

because with new bios maybe also new MMIO to convert